Ufungaji wa taa za dari ni sehemu muhimu ya taa nzima ya nyumba. Ikiwa taa za taa zilizoongozwa hazifanyi kazi. jinsi ya kubadilisha taa mpya. chini ni njia na utaratibu.

1. andaa zana za kukarabati na kubadilisha. mkanda wa umeme na taa mpya iliyoongozwa na saizi sawa ya shimo au mfano sawa. Seti, koleo, na mkono mdogo uliona ikiwa ni lazima.
2.  Zima umeme na pole pole uweke taa chini. Makini na kipande cha picha cha mwanzi kwenye taa. Baada ya kuiona, shikilia taa kwa kidole chako, Ikiwa hautazingatia kadi ya mwanzi, utaumia na kadi ya mwanzi ikiwa utavuta kichwa cha taa moja kwa moja, kwa hivyo kuwa mwangalifu kuondoa ile mbaya ya zamani taa iliyoongozwa.
3. Then first disassemble the connector, replace the lamp head, the driver does not move, turn on the light switch, if the light is not on, you can confirm that it is the driveIf the drive is faulty, replace the drive.
4. Then first disassemble the connector, replace the lamp head, the driver does not move, turn on the light switch, if the light is not on, you can confirm that it is the driveIf the drive is faulty, replace the drive.
5. Wrap one of the driver power cords on one of the lamp power cords (lighting electricity is irrespective of positive or negative), and use bakeliteThe tape is glued, and the other one is connected in the same way and wrapped with electrical tape.
6.  Inakaribia kukamilika. Ifuatayo, ongeza jaribio. Washa swichi na taa itawasha. Ikiwa haina kuwasha, rudia hatua zilizo hapo juu lakini sio gari mbadala.