Kev teeb tsa lub qab nthab teeb yog qhov tseem ceeb ntawm tag nrho cov teeb pom kev hauv tsev. Yog tias cov teeb taws coj tsis ua haujlwm. yuav hloov lub teeb tshiab li cas. hauv qab no yog txheej txheem thiab txheej txheem.

1. npaj cov cuab yeej rau kev kho thiab hloov pauv. daim kab xev hluav taws xob thiab lub teeb coj tshiab coj los nrog qhov loj me me lossis tus qauv zoo ib yam. Ib txheej, pliers, thiab tes me me pom yog tias tsim nyog.
2.  Tua lub hwj chim thiab maj mam khawm lub teeb. Ua tib zoo mloog cov reed clip ntawm lub teeb. Tom qab koj pom nws, tuav lub teeb nrog koj tus ntiv tes, Yog tias koj tsis mloog zoo rau daim npav reed, koj yuav raug mob los ntawm daim npav reed yog tias koj rub lub taub hau teeb ncaj ncaj, yog li ceev faj kom tshem qhov phem qub coj downlight.
3. Then first disassemble the connector, replace the lamp head, the driver does not move, turn on the light switch, if the light is not on, you can confirm that it is the driveIf the drive is faulty, replace the drive.
4. Then first disassemble the connector, replace the lamp head, the driver does not move, turn on the light switch, if the light is not on, you can confirm that it is the driveIf the drive is faulty, replace the drive.
5. Wrap one of the driver power cords on one of the lamp power cords (lighting electricity is irrespective of positive or negative), and use bakeliteThe tape is glued, and the other one is connected in the same way and wrapped with electrical tape.
6.  Nws tab tom yuav tiav. Tom ntej no, txhawb kev sim. Qhib lub qhov hluav taws xob thiab lub teeb yuav qhib. Yog tias nws tsis qhib, rov ua cov kauj ruam saum toj no tab sis nws tsis yog hloov pauv.